Specifications

7
figure 2 Bijou Rear Panel
NOTES: Dust, smoke and liquids can ruin any piece of
quality electronics. Keep operation areas clean and do not
allow contamination of equipment. Do not operate this
console in a wet environment (the rain).
REAR PANEL OF THE CONTROL CONSOLE
REAR PANEL OF THE CONTROL CONSOLEREAR PANEL OF THE CONTROL CONSOLE
REAR PANEL OF THE CONTROL CONSOLE
Located on the rear of the console are the output and
input jacks, power jack and On/Off power switch. Refer to the
key below for an explanation of each item. Control cables
furnished with the console mate these outputs to the system
connection plates in your facility. There are three types of
connectors on the back of the Bijou; heavy-duty XLR
connectors, standard computer grade ‘D’ style connectors
and standard computer grade 5 pin DIN connectors. All XLR
connectors are keyed and locking. All DIN connectors are
keyed. Both XLR and DIN connectors should be rotated to
align the key prior to insertion. The ‘D’ connectors are locked
in place, after insertion, by tightening thumbscrews to insure
proper connection. All connectors should mate smoothly with
no undo force. DO NOT force connectors into position. As
many components use the same style of connector please
take the time to familiarize yourself with the location of each
connector prior to plugging in each device/accessory as this
will help to insure proper operation.
1. DMX OUTPUT
(Dimmers 1-512) (5-Pin XLR)
2. DMX OUTPUT
(Dimmers 513-1024) (5-Pin XLR)
3. HHR INPUT (Optional accessory)
(Hand Held Remote Control) (5-Pin XLR)
4. DMX INPUT
(5-Pin XLR)
5. MIDI IN & OUT (Optional accessory)
(5-Pin DIN)
6. ETHERNET OUTPUT (Optional)
IEEE 802.2/803.2 compliant UTP (RJ 45)
7. PRINTER OUTPUT
(DB25)
8. ALPHA NUMERIC KEYBOARD
(5-Pin DIN)
9. VGA/SVGA MONITOR OUTPUT
(D15, 3-row, VGA standard)
10. REMOTE VIDEO
(5-Pin XLR)
11. ON/OFF POWER SWITCH
12. POWER INPUT
(100-250v~, 50-60Hz, 0.7-0.3Amp)