Specifications

REMOTE VIDEO
The console can be fitted to output the Super VGA signal to
remote locations. (Distances greater than 25 feet)
When fitted with this option, the 4-pin XLR connector will
output the signal.
When installed with a system, a remote video receiver is
required to interface to a standard SVGA monitor.
NOTE: Handle with care!
HOOK-UP OF REMOTE VIDEO
Connect 4-pin XLR from labeled video port at station or back
of the console
Connect SVGA monitor cable to DB 15-pin lableld Monitor
Connect 120VAC power transformenr cable to Power in
position.
Configure Video output (item #3) on Peripherals/Utiltiies menu
screen.
Switch on SVGA
KEYBOARD (optional)
The Bijou is designed to operate with any standard IBM PC/AT
keyboard.
If you encounter problems with using any keyboard, please
contact the factory.
Some manufacturers of AT aftermarket keyboards have been
known to be incompatable.
PRINTERS
The Bijou Console is equipped with a parallel printer output
port configured for Epson Standard protocol.
Printers tested:
Citizen GSX-190 Panasonic KX-P1124
Citizen 200GX Panasonic KX-P2023
Epson FX-870
SET UP PRINTER:
Load paper and test printer functions as identified in printer
manual.
Configure printer for standard Epson protocol. Set switch for
line-feed on carrige return.
Turn off power to printer.
Connect printer cable to console printer port.
Connect printer cable to printer output.
Turn on printer power.
Printer Connection
50