Specifications

49
Figure 37 Recording MACRO in Stage Screen
TO RUN A MACRO
TO RUN A MACROTO RUN A MACRO
TO RUN A MACRO
To run a macro, from any screen, press [Macro #]
followed by the number of the macro you want to run [1] then
[Enter] which makes the macro run. To run the macro you
just created press [Macro#] [1] [Enter] which will take you to
the SETUP screen, Save To Disk, 8. SAVE ALL, Are you
sure? Command. Now all you have to do before you take a
break is press [Enter] and you will have saved all of your work
to disk. Another good use for macros is to change the active
patch between acts.
TO DELETE A MACRO
TO DELETE A MACROTO DELETE A MACRO
TO DELETE A MACRO
From the MACRO screen you can go to the macro you
wish to delete and press [Delete] [Macro #] [Enter] and that
macro will be removed from memory. From the STAGE or
the MACRO screen you can delete any macro by pressing
[Delete] [Macro] [#] number of the macro then [Enter] which
will ask the question ‘Are you sure?’ and you will say of
course I am by pressing [Enter] one last time.