Specifications

42
keyboard to enter a name for the desired Submaster when
working/viewing it on the SUB PREVIEW screen. So type for
your new Submaster Pg 1 Sub 1 type in the name Work
Lights. Now press [Sub-master/List] twice to return to the
SUB LIST screen and you will see that the name has been
entered here as well.
So now we have one submaster recorded and we need
to record a second on Pg (page) 2. To do this press [F2] [2]
[Enter]. You will see that the Pg number in the lower part of
the screen has now changed to Pg 2. Now press the ‘Action’
key [Sub-master] [2] [Enter] which will change the screen to
reflect that you are now working on Pg 2 Sub 2 (lower left of
screen). Now enter channels [6] [Thru] [10] [And] [2] [0] [At]
[5] [5] [Enter].
You will now have channels 6 - 10 and 20 at a level of
50% maximum output for this Submaster and the Type will be
NORM.
NOTE: A Submaster does not exist unless it has at least one
channel with a output level entered.
OPERATION OF SUBMASTERS
OPERATION OF SUBMASTERSOPERATION OF SUBMASTERS
OPERATION OF SUBMASTERS
Now that you have two Submasters recorded press
[Stage] to return to the STAGE SCREEN. At the bottom of
the STAGE screen you will find:
Pg =There are 12 pages of Submaster memories
available. This window lets you select which page of
memories you want to record submaster memories to.
Sub =This is the Submaster handle location, 1-24.
At this point you should see no page numbers after Pg:
as page 1 is the default. To change the page for all 24
Submaster handles you press (action key) [Sub-master] [F2]
which brings up SUB PAGE in the command line at the
bottom of the screen, then the page number [1] thru [1] [2]
you want active on stage. At this time press [Sub-master]
[F2] [2] [Enter] which will put a green 2 above all Sub: #’s
indicating that page 2 of Submaster memories is active on the
Submaster fade handles. Now repeat the process to go back
to page 1 by pressing [Sub-master] [F2] [1] [Enter]. You
should now have no page numbers listed after Pg: indicating
you are on default page 1.
To see how the NORM (green) operates go to the
STAGE SCREEN [Stage]. Run Submaster 1’s fader handle
up and down and watch the levels of channels 1 - 5 follow the
fader with the output level shown in green raising as you raise
the handle and decreasing as you lower the handle.
WORKING SUBMASTERS ON MULTIPLE PAGES
WORKING SUBMASTERS ON MULTIPLE PAGESWORKING SUBMASTERS ON MULTIPLE PAGES
WORKING SUBMASTERS ON MULTIPLE PAGES
To increase the flexibility of the Bijou it is possible to
have Submaster memories from different pages active on the
Submaster fade handles at the same time. As you should at
this point have Sub: 01 (indicated in green) active on page 1
we will now make Pg: 2 Sub: 2 (that you created above)
active. To do this simply press [Submaster] [2] [F2] [2]
[Enter]. Now you should see both Sub: 01 and 02 indicated in