Specifications

36
Now return to STAGE Screen and [Load] cue [4] to the
AB cross fader and press [Go] to fade into it. Now you will
see Cue 5 loaded and ready to fade into. But you will also
see a new set of dialog to the left of the help screen. This
should say:
ABPARTS
LEVCUE
6
7
8
9
This shows that the you have a multipart cue ready to
run. And as soon as you press the go all of the cues that are
part of the set will begin. The LEV column will indicate the
progression of the fade in. When all of the cues have
completed the fade in this section of the screen will clear. At
this point you will see that Cue 10 is loaded on the cross fader
waiting for you [Go].
The Bijou is capable of running two simultaneous sets
(one on the XY and one on the AB faders) of Multipart cues,
each with four parts.
RUNNING CUES OUT OF NUMERICAL
RUNNING CUES OUT OF NUMERICALRUNNING CUES OUT OF NUMERICAL
RUNNING CUES OUT OF NUMERICAL
SEQUENCE
SEQUENCESEQUENCE
SEQUENCE
LINK
LINKLINK
LINK
On the CUE LIST screen you will find a column for Link
after the delay. To access the link column use the [F2] key.
A link allows you to modify the numerical sequence that
cues run in. If you create cues 1 - 25 and load cue 1 onto the
AB cross fader and cross fade into it, cue 2 will automatically
load to the other side of the cross fader ready for you to cross
fade into it. From that point on as you run through the cues
they will load in strict numerical order. This is the preferred
way of operating in most theatrical productions. But there are
times where you may need to run a production out of
sequence.
Example: The production is a dance concert and each
dance number has it’s own sequence of cues using cues 1 -
100.
On the third night of the performance a soloist breaks
their toe and can not dance a number. That dance number
used Cues 34 - 46 but now that it will not happen you need to
have the sequence be 1 thru 33 to 47 thru 100.
To make it possible to still run the entire show in
sequence you would go to the CUE LIST screen. To get to
Cue 33 (which would be the last cue prior to those affected by
the broken toe) you can use the [Next] key 33 times OR you
can press [Cue] [3] [3], which will reposition the page on
screen and move the yellow cursor down to Cue 33. Now
press [F2] Link followed by the number of the Cue you want
Cue 33 to ‘Link To’, in this case [4] [7] [Enter]. Now as you
run the cues, the Bijou will ignore Cues 34 thru 46 and just