Specifications

12
[Page Up]
Used to change position of display screen to see the last
major full screen block of information.
[Page Down]
Used to change position of display to see the next major
full screen block of information.
[FI], [F2], [F3]
The three ‘F’ (function) keys are “soft” keys. By this we
mean that their function changes for each screen.
Function keys are defined by their use in the lower right
corner of each individual screen, color code is magenta.
[Time]
Used in record process to assign fade time to cues, etc.
[Check]
Used in the STAGE and PATCH screens to do Channel
Check (Stage) and Dimmer Check (Patch).
[Create Macro]
Starts and stops the keystroke sequences for recording
a Macro.
[Macro #]
Used with a number of 1 to 2,500 and [ENTER] to
activate a macro.
[Thru]
Bridge key between channel selections and level setting
such as [2][5] [THRU] [3][2]
[Except]
Bridge key between channel selections and level setting
such as [2][5] [THRU] [3][2] [EXCEPT] [2][8]
[ ] Blank key caps
The two blank keys have no function under the latest
software. They are there for ‘future’ enhancements or
functions.
[And]
Bridge key between channel selections and level setting
such as [2][5] [THRU] [3][2] [AND] [9][8] [EXCEPT] [2][8]
[At]
Bridge key between channel selections and level setting
such as [2][5] [THRU] [3][2] [AND] [9][8] [EXCEPT] [2][8]
[AT] [FL]
[Cue Only]
In Tracking Mode of operation, levels are modified for
only the selected cue. The use of this key in the record
sequence resets the levels for the next cue as hard
levels without tracking.
[Clear]
Clears the entire command line that has been entered.