Instruction Manual

160DATA.CDR6/24/02

Model160ShotFlowMeterisusedinsteelshotpeeningtodisplay

theshotflowrate.Thisallowsadjustmentofflowformaximum

coverageinaminimumoftime,conservingenergyandincreasing

productivity.Thehigh/lowindependentlyadjustablealarmpoints

canbeusedtosignalunusualflowconditionsandisespecially

usefulinindicatingcloggedfeedvalvesorlowshotsupply.

*Dualhigh/lowalarms

*AnalogMeter

*Digitaldisplay

*0-10VDCrecorderoutput

*Displayshotflow

lbs/minorKg/min

PAGE 1
* Dual high/low alarms * Analog Meter * Digital display * 0-10 VDC recorder output * Display shot flow lbs/min or Kg/min Model 160 Shot FlowMeterisusedinsteelshotpeeningtodisplay the shot flow rate. This allows adjustment of flow formaximum coverage in a minimum of time, conserving energy and increasing productivity. The high/low independently adjustable alarm points can be used to signal unusual flow conditions and is especially useful in indicating clogged feed valves or low shot supply. 160DATA.
PAGE 2
.11" 7.30" C U T O U T 1.65" 6-32 (2)PLCS SPECIFICATIONS Power : 120VAC 50/60 Hertz, 5VA Display : Analog and Digital 0-999 Input : Voltage. Derived from 599 flow sensor Outputs : Recorder Analog Output (0-10Vdc) : +12Vdc @ 100ma : -12Vdc @ 100ma : Alarm Relay Contacts (120VAC @ 1Amp) Alarm Delay 0-10 sec. Note : The 160 flow meter must be used with a 599 flow sensor or equivelent.