User's Manual

Reset the Vibration Alarm
12. Reset the Alarm Cube
After reset, all data in the Alarm
Cube is deleted. And you need
to press and hold the [PAIR]
button again to re-pair the
Alarm Cube. If it has been
paired previously with the same
i-device, you can select
“Restore” to restore all setting
and data or select “Erase” to
start all from scratch.
If the Alarm Cube is not working
properly, press RESET button
with a pointed object, the LED
flashes twice in (purple) color.
Then the LED will flash once per
6 seconds in red color.
Alarm Cube