Instruction Manual [For iPod, iPhone and iPad User]
Main Unit Location of Control 4 1. Snooze button / LED indicator 2. 3. 4. 5. Alarm Pair Reset Battery Compartment 6. Battery door 1 FCC ID: PEQA440110813 Electronics Tomorrow Ltd. Model No: A440 DC 3V 2 X 1.
Features Thank you for purchasing the Alarm Cube. This product is designed as a Alarm Cube by working with your iPad, iPhone, iPod or other iOS devices. - Support iOS version 7 or above; - Support Bluetooth version 4.0. - Set wake up buzzer alarm with snooze function, up to 10 alarms. - Take full control of the Alarm Cube with i-device app via Bluetooth Low Energy. - Selectable alarm tone pattern and volume to different alarms. - Set count down timer.
Getting started 1. Install battery 1.1 Open the battery compartment. 1.2 Insert 2 x AA batteries in polarity (+) and (-) as indicated. 1.3 Close the battery compartment. 2. Install BleAlarm App on your idevice. 2.1 Access app store and search for BleAlarm 2.2 Select and install BleAlarm App on your idevice. BLE ALARM .
Pairing the Alarm Cube 3. Pair the Alarm Cube with BleAlarm app. 3.1 Before running the BleAlarm app, make sure the Bluetooth is turned ON at your i-device. 3.2 After you tap the app icon , the ‘Nearby Devices’ screen appears. You need to pair the Alarm Cube device before you enter the main app screen.
Pairing the Alarm Cube New Alarm Cube 3.5 The new Alarm Cube will be displayed on App and is ready for pairing. Tap the "New Alarm Cube" will start the pairing and 3.4 Press and hold the [PAIR] connection process. Once button on the Alarm Cube the Alarm Cube is paired, device for 5 seconds. You it will start time and data can find that the flashing synchronization. LED will turn from red to blue. 3.3 Tap “ Pair New Device” to search for nearby devices.
Pairing the Alarm Cube Alarm Cube Alarm Cube 3.6 After the connection is made, the following information will be synchronized: i) Current time and date ii) Alarms & timer setting iii) Unit battery level 3.7 When the Alarm Cube is paired with one i-device, other i-devices cannot pair with it again. 3.8 One idevice can pair up to 5 Alarm Cube.
Rename the Alarm Cube 4. Rename the device. Tap the device name (default is “Alarm Cube”) at the top of the screen to edit the Alarm Cube device name.
Battery status indicator 5. Battery status indicator It indicates the battery level of your Alarm Cube device. While the battery level drops below 20%, the battery icon is in red status and a low battery warning is popped up for battery replacement remainder.
Setting the alarm time 6. Setting the alarm time 6.1 Tap [New Alarm] to create a new alarm or tap the existing alarm to modify. Alarm Cube 6.2 The alarm setting screen appears. You can edit and adjust different items on this screen, which include: i) Alarm Name: Tap to edit you preferred name to this alarm. ii) Time: Tap to adjust the time for this alarm. iii) Day of Week: Tap to select which day of week to enable the alarm. - If none is selected, it will be as a once alarm.
Setting the alarm time v) Alarm volume level: Tap to select the alarm sound volume level (three options: Low, Med and High). 6.3 Complete the alarm setting. i) Tap [Done] to save the alarm setting and go back to main screen. Tap [Cancel] to restore to the original alarm setting and go back to main screen. iii) Tap [Delete Alarm] to delete the current alarm and go back to main screen.
Snooze operation 7. Using the SNOOZE function 7.1 When the alarm sounds, press the [Snooze] button to stop alarm and the snooze will repeat three time every 5 minutes. 7.2 “Maximum Snooze” and “Snooze Duration” default value can be adjusted in the preference screen according to user own preference.
To turn off the alarm 8. To disable the alarm Alarm Cube 8.1 When the alarm sounds, press the [Snooze] button once or press [Alarm] to disable the alarm. 8.2 The alarm will sound for 1 minute and stop automatically. If Snooze Enabled setting is ON, the alarm will repeat every 5 minutes. You can press the [Snooze] button to interrupt the alarm momentarily, or can press [Alarm] button to turn off 8.3 User can tap the alarm the alarm and stop the time to disable the alarm snooze function completely.
Setting the Timer 9. To set the timer Tap timer of main screen and to go into timer screen. Alarm Cube 9.1 You can edit and adjust items below on this screen. i) Timer period: Turn the roller to adjust the timer period. Sound pattern: Tap to select the tone pattern (5 options plus one random pattern available). iii) Sound volume level: Tap to select the sound volume level (three options: Low, Med and High).
Setting the timer 9.2 Using the Timer In the Home screen, you can tap “Start” under Timer to start counting. Alarm Cube Alarm Cube Then you can tap “Stop” to stop the current timer and “Start” to re-continue the timer again. The timer can be reset by tapping the [Reset].
Delete the Alarm Cube record 10. Delete the Alarm Cube record. Alarm Cube You can tap the at Nearby Devices screen to enter the Known Devices page. By tapping “Edit” and then the , you can select “Delete” to delete the Alarm Cube record on the current idevice.
Preference 11) Preference setting Tap the to enter the Preference screen. You can edit and adjust the following items on this screen. 11.1 Snooze Enabled: Tap to select ON/OFF to enable/disable the Snooze functionality. If 'Snooze Enabled' is ON, you will have two more options, which are: Maximum Snoozes: The maximum number of times to repeat the snooze function, which can be set to Unlimited or values from 1 to 9.
Preference 11.2 Alarm Sound Duration: The alarm duration, which can be set to values from 1 to 15 minutes. 11.3 Auto DST update: It will adjust Daylight Saving Time (DST) automatically based on your idevice time zone setting. The alarm clock will be automatically one hour ahead of Standard Time in summer time and will be back to the normal Standard Time when back to winter time, according to your idevice’s time zone. 11.4 Device Version: The Alarm Cube firmware version is shown for reference.
Reset the Vibration Alarm 12. Reset the Alarm Cube If the Alarm Cube is not working properly, press RESET button with a pointed object, the LED flashes twice in (purple) color. Then the LED will flash once per 6 seconds in red color. Alarm Cube After reset, all data in the Alarm Cube is deleted. And you need to press and hold the [PAIR] button again to re-pair the Alarm Cube.
Vibration Alarm unit buzzer space
Disposal of Your Old Product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste.
018-140077 BAC
