User's Manual
De-activating the Temperature Alert:
•Press the ALERT button when either the indoor or outdoor temperature has exceeded
the limit. The audible alert will stop and the alert icon will stop flashing. The arrow
icon will continue to flash to indicate the out of range condition.
•The alert will sound again if the indoor or outdoor temperature falls back within the
upper or lower limit and then exceeds the upper or lower limit again.
•To turn off the alert permanently, press ALERT until the alert icon is no longer
displayed.
VIEWING CLOCK, CALENDAR, RAINFALL RATE AND TOTAL RAINFALL
•Press the MODE button to toggle the main display between time, date, rainfall rate
and total rainfall.
•The rainfall reading is accumulative data since the last press of either the RESET or
CLEAR button. To clear the rainfall reading, press the CLEAR button when the
rainfall reading is shown on the display.
RAIN FALL HISTORY
This unit has a large capacity memory that can store and display:
•Last hour rain fall
•Last 24 hours total rain fall
•Daily rain fall ( Up to last six days as well as current day)
•Weekly rain fall ( Up to last six weeks as well as current week )
•Monthly rain fall ( Up to last six months as well as current month )
The Daily Rainfall history bar chart is set as the default display after activation.
To view the rainfall history for other time periods:
•Press HISTORY once to display the weekly rainfall
•Press again to display monthly
•Press again to display last hour (will display for 5 seconds only)
P.8