User's Manual
BATTERY INSTALLATION AND ACTIVATION
Warning:
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon zinc), or rechargeable (nickel cadmium)
batteries.
• For maximum performance in normal conditions we recommend using good quality
alkaline batteries. When temperatures are below 32°F, alkaline batteries can lose
power resulting in a loss of remote transmission. If you reside in an area that
experiences frequent temperatures below freezing, we recommend using lithium
batteries to minimize the loss of transmission.
Battery installation of Base Unit
• Open the battery door at the back of the base unit and insert (2) AA batteries
according to the polarity markings. Replace the battery door.
• Insert the end of a paper clip into the hole in RESET and push the button.
• Set the clock and calendar as follows.
Setting the Calendar, Clock, °C / °F:
• When either the clock or calendar is being displayed, press and hold the MODE
button for 3-4 seconds until the year display is flashing
• Press + or – to set the year
• Press MODE to display the date
• Press + or – to set the month and day
• Press MODE to display time
• Press + or – to set the time
• Press MODE and the display will show 12 hr
• Press + or – to set your clock to 12 hr or 24 hr time format
• Press MODE and the temperature field will be flashing
• Press + or – to select °F or °C format
• Press MODE to lock in the settings
P.4