Size: 12cm x 12cm Total 12pages P.1 (Cover) WIRELESS DIGITAL RAIN GAUGE WITH INDOOR / OUTDOOR THERMOMETER Model No.
P.2 FEATURES AND SPECIFICATIONS BASE UNIT: • RF rainfall and temperature measurement • Rainfall history tracking: last hour, last 24 hours, daily, weekly and monthly • Bar chart display for rainfall history • Daily Min. / Max. rainfall tracking with auto daily clearing • Features Decline Principal Rain Measurement Technology* • Indoor / RF outdoor temperature, auto scroll • Indoor temperature range: 32°F to 122°F (0°C to 50°C) • °C/°F selectable • Memory function to recall Min./Max.
P.
P.4 BATTERY INSTALLATION AND ACTIVATION Warning: • Do not mix old and new batteries. • Do not mix alkaline, standard (carbon zinc), or rechargeable (nickel cadmium) batteries. • For maximum performance in normal conditions we recommend using good quality alkaline batteries. When temperatures are below 32°F, alkaline batteries can lose power resulting in a loss of remote transmission.
P.5 Note: If you set the time and date after initial activation, the accuracy of the rainfall history data may be affected. Reset the unit to clear the history by pressing the RESET button then set your desired time and date. • Press the RE-SYNC button. • Position the Rain Collector/Remote Sensor close to the base unit. Battery installation of Rain collector • Press the hook and open the rain collector unit outer case and remove the inner cover to access RESET/RE-SYNC buttons.
P.6 The top, left of the base unit display will show the icon to indicate signal transmission. If the OUT temperature does not show on the display within 6 minutes after reset, press the RE-SYNC button and the main unit will search for the RF signal for another 6 minutes. If the base unit still fails to show the out temperature, refer to the LOSING SYNCHRONIZATION section.
P.7 • Press the IN-OUT TEMP button to toggle between indoor and outdoor temperature. • To activate Auto Scroll mode, press and hold the IN-OUT TEMP button for 3-4 seconds. Double curved arrows will show at the top of the LCD display and the unit will automatically toggle between indoor and outdoor temperature. Press and hold the IN-OUT TEMP button for 3-4 seconds to de-activate Auto-Scroll mode.
P.8 De-activating the Temperature Alert: • Press the ALERT button when either the indoor or outdoor temperature has exceeded the limit. The audible alert will stop and the alert icon will stop flashing. The arrow icon will continue to flash to indicate the out of range condition. • The alert will sound again if the indoor or outdoor temperature falls back within the upper or lower limit and then exceeds the upper or lower limit again.
P.9 • Press again to display last 24 hours (will display for 5 seconds only) • Press again to return to daily More detailed daily, weekly and monthly history data are available. Press and hold the HISTORY button when your desire corresponding history data are shown. The “0” (Current) bar will show up and the precise data will be shown on the time display. Press + or – and you can scroll through the daily, weekly or monthly prior data. Note: On the bar chart display, the “0” represents the current period.
P.10 LOSING SYNCHRONIZATION If the main unit displayed a proper OUT temperature and rainfall rate, but now displays blanks “--.-C” or “--.—in”, the unit may have lost synchronization. If this occurs, press the RE-SYNC button of the main unit and the RE-SYNC button on the rain collector. The base unit will search for the RF signal for 6 minutes and will re-initialize synchronization with the remote unit.
P.11 Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
P.12 LIMITED WARRANTY Springfield warrants this product to be free from defects in workmanship or material for a period of one year from the date of purchase. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OF FITNESS AND MERCHANTABILITY ARE HEREBY LIMITED IN DURATION TO A PERIOD ENDING ONE YEAR FROM THE DATE OF PURCHASE. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
