Size: commit) x 210mm(H) moi Location of Controls Wireless Temperature/Humidity Sensor Main Unit Base {Transmitter ELECTABLE 2. RESET Wireless Rain Gauge | 1, RESET 2. He-syn LCD Features The Weather station with Atomic Clock can be set to many different modes. The LCD shown is the normal operating mode, The actual dale shown will be different. based on your local settings and conditions, Alarm On Indicator Snooze Un Indicator Month and Date 1.
P3 P4 Quick Start Battery Installation Clock Main Unit 1 Plug the main uit into the wall outlet using the included 7.5V adapter. 2 Insert 4 AAA batteries ino the gallery compartment on the bottom of the main unit ensuring proper polarities as indicated. Batteries are lor backup encase AC power goes out Note: When a low-battery compartment icons appears in the indoor temperature and humidity window on the LCD, replace the battles. Wireless Temperature / Humidity Transmitter 1.
P.5 P.6 Weather Conditions The:current weather condition is displaced using one of Hive animated icons. Sunny. Partly cloudy, cloudy. Rainy or table below | The Stormy icon only appears when a sudden and serious drop in atmospheric pressure is detected. SUNNY PARTLY CLOUDY STORMY 5s o> Barometric Graph 1..The barometric graph shows the previous day's pressure changes. The Time Axis shows the changes from the previous day. Eg d=400anm B=800am 12=12 0pm 16 =400 0m. 20=800 pny and 24 = 1200 am. 2.
P7 PS Manual Clock Setting Specifications 1. Press and hold SET button 2 Sec until a beep sound to start clock selling. The year will display in Temperature flashing on the clock time position of the LED. Measure Range Indoor { Outdoor (18°C Wo 70°C) BEF) 2. Press | ~ buttons to adjust the year between 2004 and 2089 Resolution Indoor 0.570 F1°F 3. Press SET button consecutively to proceed to Month-Date setting: Hour-Minute setting. 12-Hour / 24{MAIN UNIT) Outdoor 01°C 10.
