Color-Coded LCD Weather Station & AM/FM-Stereo Radio/Alarm Clock MI605 Instructions Read and save these instructions. MI605 IM_v1_0905.
Dear Sharper Image Customer, Thank you for your purchase of a Sharper Image product. We appreciate your business very much. Please accept my personal assurance of your complete satisfaction with this product’s quality and performance. We offer generous return privileges and excellent warranties on all our products. For more than 25 years, The Sharper Image has shared the fun of discovering innovative products that make life better and more enjoyable.
Table of Contents Warnings............................................................................................................... 4 Caution.............................................................................................................. 4 Quick Start ........................................................................................................... 4 Synchronization of Remote Unit & Main Unit.................................................... 5 Weather Forecast.................
Warnings Warning: Changes or modifications to this unit not expressly approved by the manufacturer will void the warranty. Caution 1. Avoid exposing the wireless remote unit to extreme temperatures, water or severe shock. 2. Do not expose the main unit to conditions of excessive force, shock, dust, extreme temperature, direct sunlight or humidity. Any of these conditions may shorten the life of the clock. 3. Do not tamper with any of the internal components of the unit.
Quick Start 5. A weather icon appears on the display showing the weather with one of five different icons from Sunny to Stormy. These icons project the next six hours of weather and weather trends. The weather center must be acclimated to the local area and altitude. This process takes 48 hours. Notes: • The first weather reading will not be accurate. • For more details on weather forecast icons and features, refer to the section entitled, “Weather Forecast.” 6.
Synchronization of Remote Unit & Main Unit will reduce the range significantly). It is very important that the remote unit not be placed in direct sunlight and should be protected from extreme weather. This allows you to receive an accurate outside temperature reading and weather forecast. Note: For more details on synchronization, please refer to sections entitled, . “Wireless Remote Temperature Transmission” or “Transmission Troubleshooting.” Weather Forecast The main unit has a built-in barometer.
General Instructions Location of Controls Top Panel RE-SYNC MONTH/HOUR CLEAR ANTENNA DATE/MIN YEAR 12/24 TEMP MAX/MIN SLEEP RADIO ON-OFF RESET °C/°F LOCK/ALM/TIME/CAL VOICE/BEEP/OFF SNOOZE/ ALARM STOP/VOICE TUNNING VOLUME HIGH/ DIMMER/LOWER PRESET MEMORY SET BAND/AM/FM Screen TIME INDOOR TEMP CALENDAR OUTDOOR TEMP ALARM TIME WEATHER FORECAST FM/AM RADIO Remote Unit Foldable Stand LCD Wall Mout Holder Battery Door RESET °C/°F Buttons on Top Panel 1.
Buttons on Top Panel 4. CLEAR – Clears the maximum and minimum temperature data while the maximum and minimum temperature is shown on the LCD. 5. RE-SYNC – Resynchronizes the main unit with the remote unit. 6. HOUR/MONTH – Changes the hour or month when setting the clock or calendar. 7. MIN/DATE – Changes the minutes or day when setting the clock or calendar. 8. 12/24/YEAR – Changes from 12-hour time to 24-hour time when setting the clock or the year when setting the calendar. 9.
Setting the Clock 1. Slide the LOCK/ALM/TIME/CAL switch to the TIME position. The clock time blinks. 2. To set the time, press the HOUR/MONTH and MIN/DATE buttons until the . desired time appears on the display. 3. To change 12-hour time to 24-hour time, press the 12/24/YEAR button. 4. Slide the LOCK/ALM/TIME/CAL switch to LOCK position. Setting the Alarm 1. Slide the LOCK/ALM/TIME/CAL switch to the ALM position. . The alarm time blinks. 2.
Radio Operation 5. To automatically scan for stations with clear signals, press and hold the TUNING UP (5) or TUNING DOWN (6) button until the tuner begins searching for a station. The tuner will automatically stop on the next clear station. Note: The tuner automatically transmits stations in stereo if that particular station is sending a stereo signal. The STEREO icon appears on the display. Station Memory Presets 1. To turn the radio on, press RADIO ON-OFF button. 2.
Weather Forecast The main unit has a built-in barometer. The local weather forecast and weather . tendency are predicted using the rate of change in atmospheric pressure based upon a norm. When you first turn on the unit, it takes 48 hours for the unit to sense and calculate the norm or the middle pressure level. After this time, the unit shows weather tendencies due to an increase or decrease in the barometric pressure. The icon on the unit shows what the weather tendency will be over the next six hours.
Indoor and Outdoor/Remote Temperature Readout 1. The indoor and outdoor temperatures can be displayed in either °F or °C. To select °F or °C, press the °C/°F button on the main unit or remote unit until the desired display appears. The main unit converts the temperature if the remote transmitter unit is set to a different temperature display. If the . temperature exceeds or falls below the unit’s range, the LCD shows either “HI” or “LO” in place of the temperature. 2.
Transmission Troubleshooting 1. If the main unit does not receive signals within the first 10 minutes, a blank “--” appears in the OUT TEMP field on the LCD. If at any time during operation a signal is not received after five consecutive intervals, blank “--” appears. The remote unit is either too far away or there is some interference between the remote and the main unit. If this happens, bring the remote unit close to the main unit and press the RE-SYNC button.
Talking Clock To hear the current time, outdoor temperature and weather report, press the SNOOZE/ALARM STOP/VOICE button. If you press this button while the radio is on, the radio turns off temporarily. Once the update has been played, the radio automatically resumes play. Alarm Functions Voice Alarm The voice alarm wakes you to the following sequence: 5 seconds of beeping, . followed by “Good morning,” the current time, outdoor temperature, the weather report and then the radio plays for one hour.
Temperature-Sensing Backlight The LCD backlight color is automatically determined by the recorded outdoor/. remote temperature. 1. Cold (blue colored backlight): Below 50°F/10°C. 2. Normal (amber colored backlight): 50.1°F – 75°F/10.1°C – 23.9°C. 3. Warm (red colored backlight): Above 75°F/24°C. • To enable the automatic temperature-sensing backlight to remain on at all times, plug the main unit into a wall outlet using the included adapter.
MI605 IM_v1_0905.
Warranty What Is Covered This warranty covers any defects in materials or workmanship, with the exceptions stated below. How Long Coverage Lasts This warranty runs for 90 days from the date of original purchase. What Is Not Covered This warranty does not cover damage caused by misuse or use other than as intended and described in the product instruction manual, or loss or damage to batteries or removable parts.
