User's Manual

Correct usage of the batteries
•Use 2 new "AA" alkaline batteries (not included)
•Do not mix standard or rechargeable batteries
•Do not mix new and old batteries
• When the low battery mark " " appears on the display, replace the appropriate batteries with new ones.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a class B digital device,
prusuant to Part 15 of the FCC Rules. these limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the insturctions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Under the environment with radio frequency interference, the sample may malfunction and require user to reset the
sample.
LIABILITY DISCLAIMER:
•The manufacturer and supplier cannot accept any responsibility for any incorrect readings and any consequences 
that occur should an inaccurate reading take place.
•This product is not to be used for medical purposes or for public information.
•The specifications of the product may change without prior notice.
•This product is not a toy. Keep out of the reach of children.
•No part of this manual may be reproduced without written authorization of the manufacture.
SPECIFICATIONS
Temperature measuring range
Indoor: 32°F to 122°F with 0.2°F resolution
 0°C to 50°C with 0.1°C resolution
Outdoor: -4°F to 140°F with 0.2°F resolution
 -20°C to 60°C with 0.1°C resolution
Temperature checking interval
Indoor:    every 16 seconds
Outdoor Transmitter: every 16 seconds
Outdoor temperature display on clock:every 3 minutes
Transmission distance: maximum 100 feet in open field, depending upon surrounding structures, mounting location 
  and possible interfering sources.
Power source (Alkaline batteries recommended)
Atomic Clock:  2 AA batteries, 1.5V batteries
Wireless Transmitter: 2 AA batteries, 1.5V batteries.
Battery life:  about 12 months
Dimensions (LxWxH)
Atomic Clock:  9.8x8.1x1 inches / 25x20.5x2.5 cm
Wireless Transmitter: 3.9x2.8x0.8 inches / 10x7x2.2cm
Made in China
P.8
M024