Size: 140mm{W} x 177mmiH) total 8 pages (M082) # Fi P2 Mo INSTRUCTION MANUAL Locations of Control Main Unit {Receive} STRAIGHTEN BUTTON TEMP MIN/MAX BUTTON SET BUTTON WAVE BUTTON “CFF BUTTON CLEAR BUTTON a SNOOZE/ALARM ON/OFF SWITCH + (Onward Set) BUTTON a Wl (Backward Set BUTTON I RE-SYNC BUTTON © RESET BUTTON IR TIME ZONE'S Model 8441 Remote Unit (Transmitter) EY RESET Button Battery Compartment BER @ Wal Bracket i crF os a 8 Model 7082 | The configuration of your clock may differ somewhat from that shown
Pa 062 pa Moog Location Precautions: This clock receives a radio wave much like a TV of radio. Be sure to Locate it near.a window or some other Check IN/ REMOTE Temperature locations where reception is good. Avoid the following locations, which can interfere with proper reception. N RAT or smo se HT rare soi ne Sin a wets The mit sac. Cai 3, whops an pen Hew someone gen illicit, Com Beg feel on ce 453 65.
Ps M082 RE M082 {Sing sirens set Sin 1 mig 416 Gens Bre ai gis op Using The Clock As long as batteries are supplying power to the main unit, #receives the time signal and adjusts time automatically. No manual adjustment is required. Accurate adjustment of the clock based on the time signal is. supported in The continental UAS.
P7 M082 Pg M082 Trouble-Shooting / FAQ {Frequent Ask Questions} Specification + Press the "Reset" button when the clock is displaying irrelevant temperature reading. This may happen when external noise is severe enough fo interfere with the RF temperature signal Temperature measuring range + Cross the ‘Rena’ button on the wireless transmitter if the readout is irrelevant or does not respond. Receiver “50°C ta +70°C with 0.
