User's Manual
MIN 12/24HR
HR
TIME SET
LOCK
PST
MST CST
EST
DST
ON OFF
C
F
RESET RE-SYNC WAVE
CST ESTMSTPST
PACIFIC
STANDARD TIME
MOUNTAIN
STANDARD TIME
CENTRAL
STANDARD TIME
EASTERN
STANDARD TIME
FCC ID : PEQ83839030 3
This device complies wit h Part 15 of t he FCC Rule s.Operation is
subject to the following tw o conditions : (1) this de vice may not ca-
use harmful interference, and (2) this device must accept any int e
rference received,including interference that may caus e undesired
operation.
-
RE M OT E IN / OU T TH E RM O M ETE R RA D IO C ON TR OL LE D C LO CK
M ON TH D AT E D AY RE M OTEIND OO R
P
M
P.4
P.5
Features
•Receives 60kHz WWVB signal.
•Automatic time and date adjustment after signal reception.
•Calendar with day of the week display from January 1, 2000 to December 31, 2097.
•Hour, minute and second display.
•12 or 24-hour format.
•Time accuracy (U.S. Atomic clock): better than 1 second in 3,000 years.
•Time accuracy (free run): +/- 60 seconds per month.
•Indoor temperature and Remote temperature.
•Centigrade or Fahrenheit readout.
•Battery life : approximate 1 year with alkaline batteries.
•Clock operating temperature from 0°C to 50°C (32°F to 122°F)
•Indoor, Outdoor Temperature measuring range from -20°C to 60°C (-4°F to 140°F)*
•Temperature resolution 0.1°C.
*If using the wireless transmitter with temperatures below 32°F or above 122°F, users are recommended
to use Lithium battery to enhance battery life.
Also, the LCD readout on the wireless transmitter will be blurred when operation takes place with
extreme temperature conditions. The LCD readout will resume the normal display when placed at room
temperature for 1-2 hours.
Getting Started
Batteries Installation
Batteries installation of the clock
•Open the battery cover of the main unit.
•Insert 2 "AA" batteries in polarity (+) and (-) as indicated.
•Close the battery cover
•The low battery icon will show in the indoor temperature window when your batteries need
replacement.
Batteries installation of wireless transmitter
•Open the battery compartment door.
•Insert 2 "AA" size batteries in proper polarity (+) and (-) as indicated.
•Close the battery door.
•The low battery icon will show in the wireless transmitter LCD when your batteries need replacement.
Warning: Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel cadmium) batteries.
The low battery icon in the outdoor temperature window of the clock indicates low battery condition of
the wireless transmitter.
Atomic clock with wireless outdoor temperature consists of the clock and a wireless temperature
transmitter.
To ensure proper functioning of your atomic clock with outdoor temperature, please follow this power up
procedure:
1.Insert new batteries into the main unit.
2.Insert batteries into the remote temperature transmitter.
3.Slide the time zone switch on the back of the clock to your time zone:
PST = Pacific Standard Time
MST = Mountain Standard Time
CST = Central Standard Time
EST = Eastern Standard Time
4.Slide the daylight savings time switch (DST) to ON. This setting allows your clock to
automatically change from standard time to daylight savings time and back each spring and fall. If
you live in an area that does not recognize daylight savings time (Arizona and parts of Indiana)
slide the DST switch to off.
Do not touch any other buttons or settings on you clock. It will automatically receive the
remote temperature and set your clock to the exact time, day, date and indoor
temperature.
Outdoor Temperature
Upon power up (or pressing the reset button) the temperature RF signal is immediately sent to the clock.
The clock attempts to receive the RF temperature signal for 5 minutes. The clock refreshes the RF
temperature every 3 minutes.
If the RF temperature signal is not received within 5 minutes, blank " " will appear in the outdoor
temperature window of the clock. In this case, press the TEMP FINDER button behind the flip over stand
of the clock. The clock will attempt outdoor temperature reception for another 6 minutes.
Location of Controls:
Wireless Transmitter
Clock
Time
Indoor
Temperature
Outdoor
Temperature
Hour/
Month
Minute/
Date
12/24HR/
Year
Calendar/
Time Set/
Lock
PST/MST/
CST/EST
°C/°F
Reset Wave
RE-SYNC
DST
ON/OFF
Month/
Date/Day
RESET
LOCK
OPEN
C
F
LCD
Wall Mount
Holder
°C/°F
Reset
Battery Door
REMOTE