User's Manual

ManualsBrandsElectronics Tomorrow ManualsElectronics433MHz RF Receiver Clock

INSTRUCTION MANUAL

With Wireless Outdoor and Indoor Temperature

Care of your clock

•Avoid exposing your clock to extreme temperatures, water or severe shock.

•Avoid contact with any corrosive materials such as perfume, alcohol or cleaning agents.

•Do not subject the clock to excessive force, shock, dust, temperature or humidity. Any of these conditions 

may shorten the life of the clock.

•Do not tamper with any of the internal components of this clock. This will invalidate the warranty and 

may cause damage.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one of more of the

following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Under the environment with radio frequency interference, the sample may malfunction and require user to

reset the sample.

LIABILITY DISCLAIMER:

•The manufacturer and supplier cannot accept any responsibility for any incorrect readings and any consequences 

that occur should an inaccurate reading take place.

•This product is not to be used for medical purposes or for public information.

•The specifications of the product may change without prior notice.

•This product is not a toy. Keep out of the reach of children.

•No part of this manual may be reproduced without written authorization of the manufacture.

SPECIFICATIONS

Temperature measuring range

Indoor: 32°F to 122°F with 0.2°F resolution

 0°C to 50°C with 0.1°C resolution

Outdoor: -4°F to 140°F with 0.2°F resolution

 -20°C to 60°C with 0.1°C resolution

Temperature checking interval

Indoor:    every 16 seconds

Outdoor Transmitter:  every 16 seconds

Outdoor temperature display on clock:every 3 minutes

Transmission distance: maximum 100 feet in open field, depending upon surrounding structures, mounting location 

  and possible interfering sources.

Power source (Alkaline batteries recommended)

Atomic Clock:  2 AA batteries, 1.5V batteries

Wireless Transmitter: 2 AA batteries, 1.5V batteries.

Battery life:  about 12 months

Dimensions (LxWxH)

Atomic Clock:  295x25x200mm

Wireless Transmitter: 125x40x45mm

Size: 130mm(W) x 182mm(H) Model 8373+7062

P.1P.8

REMOTE

R EM O TE IN / O UT TH ER M OM E TER R A DIO CO NT RO LL ED CL OC K

M ON TH D A TE D A Y R EM O TEIN D OO R

Summary of content (4 pages)

PAGE 1
P.8 P.1 Care of your clock • Avoid exposing your clock to extreme temperatures, water or severe shock. • Avoid contact with any corrosive materials such as perfume, alcohol or cleaning agents. • Do not subject the clock to excessive force, shock, dust, temperature or humidity. Any of these conditions may shorten the life of the clock. • Do not tamper with any of the internal components of this clock. This will invalidate the warranty and may cause damage.
PAGE 2
P.2 P.3 Environmental Reception effects: The ATOMIC Clock The Atomic Clock obtains the accurate time with wireless technology. Same as all wireless With the Atomic Clock, you have the most accurate timepiece within the devices, the receiving ability may be affected by, but not limited to, the following continent.
PAGE 3
P.5 P.4 Getting Started Features Batteries Installation • Receives 60kHz WWVB signal. • Automatic time and date adjustment after signal reception. • Calendar with day of the week display from January 1, 2000 to December 31, 2097. • Hour, minute and second display. • 12 or 24-hour format. • Time accuracy (U.S. Atomic clock): better than 1 second in 3,000 years. • Time accuracy (free run): +/- 60 seconds per month. • Indoor temperature and Remote temperature. • Centigrade or Fahrenheit readout.
PAGE 4
P.6 P.7 Try relocation the clock or the transmitter if the clock does not display the outdoor temperature after 6 minutes. The RF Temperature signal indicator in the clock's outdoor temperature window will show the following: NO SIGNAL DETECTION SIGNAL DETECTION SUCCESSFUL RECEPTION Atomic Clock Reception Your atomic clock receives the offical US time signal from the US Atomic clock in Ft. Collins, Colorado.Successful reception will activate the WAVE OK icon.