INSTRUCTION MANUAL Locations Of Control Main Unit Leo n Bn a SELECT/CHANNEL BUTTON = BUTTON 8 CLEAR BUTTON {IB “C/™F BUTTON a SHYLOCKIAN SET/TIME SET {Ml CALENDAR SWITCH |B TRIMONTHLY BUTTON {BB NOMINATE BUTTON 1H 12024/YEAR BUTTON RESET BUTTON 3 BATTERY DOOR SNOOZE/LIGHT BUTTON 1) RE-SYNC BUTTON ~~ [crouch] SNOOZE MONTCALM OFF SWITCH Remote Unit LCD CIF Reset B Battery Door Wall Mount Holder
Feature ® 0606000 000 IN temperature and REMOTE temperature Centigrade or Fahrenheit readout Hour and minute display 12 or 24 hour format Calendar with day of week display from January 1, 2000 to December 31, 2030 Maximum and Minimum Temperature record Battery life : approximate 1 year ( with alkaline battery ) Operating temperature from 0C to 40C (32F to 104F) Temperature measuring range from —50C to 70C (-58F to 138F) Temperature resolution 0.
Notes: Do not use old batteries or different batteries together. Getting Started Once batteries are placed in the main unit, it will start receive signal for 5 minutes, also once batteries are placed in the remote unit, it will start to transmit information t 3 minutes intervals. Upon successful reception, the remote unit temperature will be displayed on the Remote temperature field. The main unit will automatically update the remote reading at 3 minutes intervals.
Clock Set At the back of the RF Thermos Clock, slide the switch to TIME SET and the time will keep flashing on the display. Then press HR or MIN Hutton to set your desired time and slide the switch to the LOCK position to complete the time set. Calendar Set At the back of the RF Thermos Clock, slide the switch to CALENDAR and the date will keep flashing on the display.
The unit is in receiving mode 7 lee w“_ Transmission data are securely received Cer Transmission date are not securely received or no signals Lose Synge. If without obvious reasons the display goes blank, press RE-SYNC to force the receiver to start receive signal. If it still fails, check: ® The remote unit is still in place. ® The batteries of both remote unit and main unit, replace as necessary. @® The transmission is within range and path is clear of obstacles and interference.
The remote unit comes with a wall mount holder which can hold the unit on wall, or just place it on a flat surface. Reset the RF Thermos Clock Press the RESET button when the RF Thermos Clock does not operate normally. Note: Once resetting the RF Thermos Clock, the main unit will start to receive for 10 minutes { Refer to Getting Started ). Take care of your RF Thermos Clock ® Avoid exposing your RF Thermos Clock to extreme temperatures, water or severe shock.
to 158.0F) Proposed operating range : 0.0Ct040.0C (32.0F to 104.0F) Temperature resolution + 01C Power ¢ apes AAA 1.5 V alkaline battery Weight Dimension Remote Unit : Display temperature range: -50.0C to 70.0C to 158.0F) Proposed operating range : -20.0C to 60.0C to 140.0F) Temperature resolution : OIC Power © apes AA 1.
