User's Manual

M059 M059
Do not touch any other buttons or settings on your clock. It will automatically receive
the remote temperature.
Getting Started
Upon power up of the remote unit ( or pressing the reset button ), the temperature RF signal
is immediately sent to the main unit. The main unit attempts to receive the RF temperature
signal for 5 minutes. The main unit refreshes the RF temperature every 3 minutes.
Check IN / REMOTE Temperature
The indoor temperature is displayed on the IN temperature field and the remote
temperature will be displayed on the REMOTE temperature field.
If the RF temperature signal is not received within 5 minutes after power up of the main unit
(or pressing the reset button), blank "---" will appear in the outdoor temperature window of
the main unit. In this case, press the HR/SYNC button of the main unit. The main unit will
attempt outdoor temperature reception for another 6 minutes.
After the remote temperature shows in the lower LCD panel, place the remote unit outside
in a shaded, dry area to protect it as if under an umbrella.
Try relocating the unit if the main unit does not display the remote temperature after 6
minutes.
Maximum and Minimum IN / REMOTE Temperature
The maximum and minimum recorded temperature readings will automatically be stored in
the memory.
Press the Max/Min button once to display the indoor maximum and minimum record. Press
the button again to show the REMOTE maximum and minimum record. The respective
indicators, IN and REMOTE will be displayed.
To clear the memory, press CLEAR when the maximum and minimum temperature records
are shown, it will clear the record of the shown temperature field.
Clock Set
1.Slide the LOCK/ALM/TIME/CAL switch to TIME position. The clock time blinks.
2.To set the time, press the HR/SYNC and MIN/CLEAR buttons until the desired time
 appear on the display.
3.Slide the switch to LOCK position.
Alarm Set
1.Slide the LOCK/ALM/TIME/CAL switch to ALM position. The alarm time blinks.
2.To set the alarm time, press the HR/SYNC and MIN/CLEAR buttons until the desired  
 alarm time appear on the display.
3.Slide the switch to LOCK position.
Calendar Set
1.Slide the LOCK/ALM/TIME/CAL switch to CAL position. The calendar date blinks.
2.To set the calendar date, press the MONTH 12/24, DATE/°C/°F and YEAR/MAX/MIN  
 button until the desired calendar date appear on the display.
3.Slide the switch to LOCK position.
To Activate Alarm Function
1.Slide the SNZ/ALARM ON/OFF switch to ON position, the sign will appear on the time 
 display. The alarm function is activated.
2.When the alarm sounds, press the Snooze/Light button. The alarm will sound the same 
 time of the next day.
3.To deactivate the alarm function, slide the SNZ/ALARM ON/OFF switch to OFF position.
To Activate the snooze alarm
1.Slide the SNZ/ALARM ON/OFF switch to SNZ position. The sign and Zz will appear
 on the time display.
2.When the alarm sounds, press the Snooze/Light button. The alarm will sound again in 
 approximately 5 minutes. You may repeat this function for 10 minutes.
3.To deactivate the snooze alarm, slide the SNZ/ALARM ON/OFF switch to the OFF  
 position.
12HR/24HR International Time Display Set
Press the 12HR/24HR button to choose the desired display format. "AM" or "PM" will be
displayed only in 12HR format.
Centigrade (°C) or Fahrenheit (°F) set
Press the °C/°F button to choose the Centigrade or Fahrenheit readout. Note that the
remote temperature display on the main unit is dominated by the selection on the main unit.
Whatever the display unit of the remote unit is, it will be automatically converted to the
chosen one of the main unit.
P.4P.3