User's Manual

16
Voice Alarm
The voice alarm wakes you to the following sequence: 5 seconds of beeping,
followed by Good morning, the current time, outdoor temperature, the weather
report, any personal messages you have recorded and then the radio plays for one
hour. If no outdoor temperature is recorded on the display, the alarm skips this
function. If there are no personal messages recorded, the alarm skips this feature.
1. To select the voice alarm, slide the
OFF/BEEP/VOICE switch to VOICE.
2. To turn off the voice alarm once it has sounded, press the
ALARM STOP/TALKING/
LIGHT
button.
Beeping Alarm with Snooze
The beeping alarm with snooze wakes you to one minute of beeping that repeats
every five minutes until the alarm is turned off.
1. To select the beeping alarm with snooze, slide the
OFF/BEEP/VOICE switch
to
BEEP.
2. To activate the snooze function after the alarm has sounded, you may either
wait for the alarm to turn off after one minute or you may press the
ALARM
STOP/TALKING/LIGHT
button. In both instances the alarm repeats every five
minutes until it is turned off.
3. To turn off the snooze alarm, slide the
OFF/BEEP/VOICE switch to OFF.
Temperature-Sensing Backlight
The LCD backlight color is automatically determined by the recorded
outdoor/remote temperature.
1. Cold (blue colored backlight): Below 50°F/10°C.
2. Normal (amber colored backlight): 50.1°F 75°F/10.1°C 23.9°C.
3. Warm (red colored backlight): Above 75°F/24°C.
To enable the automatic temperature-sensing backlight to remain on at all times,
plug the main unit into a wall outlet using the included adapter.
To activate the automatic temperature-sensing backlight while the unit is run-
ning on battery power, press the
ALARMSTOP/TALKING/LIGHT button. The
backlit LCD turns on for 3 seconds.
Alarm Functions