User's Manual

Up to eight personal messages can be stored in the voice-memo center. The

Voice-Memo field on the LCD shows “0” until a message is recorded.

1. To record a message in the first memo position (or the next available position),

press and hold the

RECORD button. A beep sounds and “REC” appears on the

display. Speak in a normal voice 15 inches away from the microphone above

the LCD. Messages can be a maximum of 6 seconds long. A double-beep

sounds if your message reaches 6 seconds before you release the

RECORD

button.

Note: If you do not hear a beep after pressing the RECORD button, turn up the

volume and re-record your message.

2. Release the

RECORD button when you are finished recording your message. A

beep sounds and the message number is shown on the display in the memo field.

3. To record additional messages (up to eight), repeat steps 2 and 3. The message

number automatically increases in the memo field. If you try to record more

than eight messages, an “F” appears on the display to indicate the message center

is full.

4. To play a recorded message, press the

FORWARD or BACKWARD button until

the desired memo number appears on the display.

5. Press the

PLAY button. “PLAY” appears on the display.

Note: If the radio is on, pressing the PLAY button momentarily turns off the radio

to play the message. The radio turns back on after the message has played.

6. To erase a recorded message, press the

FORWARD or BACKWARD button

until the desired memo number appears on the display. Press the

ERASE button.

The remaining messages will be renumbered.

Talking Clock

To hear the current time, outdoor temperature and weather report, press the

ALARM STOP/TALKING/LIGHT button. If you press this button while the radio is

on, the radio turns off temporarily. Once the update has been played, the radio

automatically resumes play.

Voice-Memo Center