User's Manual
11
5. To automatically scan for stations with clear signals, press and hold the
TUNING
UP
(▲) or TUNING DOWN (▼) button until the tuner begins searching for a
station. The tuner will automatically stop on the next clear station.
Note: The tuner automatically transmits stations in stereo if that particular station
is sending a stereo signal. The STEREO icon appears on the display.
Station Memory Presets
1. To turn the radio on, press RADIO ON/OFF button.
2. To select the desired band, press the
BAND AM/FM button.
3. To store a radio station in one of the 15 AM and 15 FM preset positions, tune
in the desired station.
4. Press the
MEMORY SET button. The preset number flashes.
5. To select the desired memory location, press the
PRESET button until the
desired preset position appears on the display.
6. To confirm, press the
MEMORY SET button again.
7. To scroll through all of the preset radio stations, repeatedly press the
PRESET
button. The unit will cycle through all preset stations in order.
Sleep Timer
The radio can be set to automatically turn off after a certain number of minutes
(from 10 to 90).
1. To set the sleep timer while the radio is on, press and hold the
SLEEP button
for 2 seconds. The radio turns off temporarily. “90 MINS” flashes on the display.
2. To select the duration of the sleep timer, press the
SLEEP button repeatedly
until the desired length of time appears. The timer decreases in 10-minute
increments between 90 and 10 minutes each time the
SLEEP button is
pressed. Two seconds after setting the desired length of time, the radio turns
on again. The sleep timer is now set.
Note:
• To turn off the sleep timer, press the SLEEP button until “00” appears. The radio
will not turn off automatically.
• The SLEEP mode only works when you manually turn on the radio.
Radio Operation