User's Manual
M043 M043
Getting Started
Upon power up of the transmitter ( or pressing the reset button ), the temperature RF signal
is immediately sent to the clock. The clock attempts to receive the RF temperature signal for
5 minutes. The clock refreshes the RF temperature every 3 minutes.
Check IN / REMOTE Temperature
The indoor temperature is displayed on the IN temperature field and the remote
temperature will be displayed on the REMOTE temperature field.
If the RF temperature signal is not received within 5 minutes after power up of the receiver
(or pressing the reset button), blank "---" will appear in the outdoor temperature window of
the clock. In this case, press the HR/SYNC button of the clock. The clock will attempt
outdoor temperature reception for another 6 minutes.
After the remote temperature shows in the lower LCD panel, place the remote transmitter
outside in a shaded, dry area to protect it as if under an umbrella.
Try relocating the clock or the transmitter if the clock does not display the outdoor
temperature after 6 minutes.
Maximum and Minimum IN / REMOTE Temperature
The maximum and minimum recorded temperature readings will automatically be stored in
the memory.
Press the Max/Min button once to display the INDOOR maximum and minimum record.
Press the button again to show the REMOTE maximum and minimum record. The
respective indicators, IN and REMOTE will be displayed.
To clear the memory, press CLEAR when the maximum and minimum temperature records
are shown, it will clear the record of the shown temperature field.
To Set Calendar
Press SET one time, upper LCD show year "2002" and blinks. Press + or - button to set year.
Press and hold + or - will accelerate setting in faster speed.
Press SET again, upper LCD changes to 1
M
1
D
and blinks, press + or - button to set month
and date.
Press and hold + or - will accelerate setting in faster speed.
To Set Time
Press SET again, time digits blink, press + or - button to set time in minutes.
Press and hold + or - will accelerate setting in faster speed.
To Set 12HR / 24 HR Time Format
Press SET again, upper LCD shows 12H and blink, press + or - button to select 12H or 24H.
Press SET again to go back to current time display or if no button is further pressed for few
minutes, the clock will go back to normal time display automatically.
To Set Daily Alarm Time
When the clock is at normal time display, press + or - to set your desired alarm time. Press
and hold + or - will accelerate setting in faster speed.
To Activate Alarm Function
1.Slide the SNZ/ALARM ON/OFF switch to ON position, the sign will appear on the time
display. The alarm function is activated.
2.When the alarm sounds, press the Snooze/Light button. The alarm will sound the same
time of the next day.
3.To deactivate the alarm function, slide the SNZ/ALARM ON/OFF switch to OFF position.
To Activate the snooze alarm
1.Slide the SNZ/ALARM ON/OFF switch to SNZ position. The sign and Zz will appear on
the time display.
2.When the alarm sounds, press the Snooze/Light button. The alarm will sound again in
approximately 5 minutes. You may repeat this function for 10 minutes.
3.To deactivate the snooze alarm, slide the SNZ/ALARM ON/OFF switch to the OFF position.
Centigrade (°C) or Fahrenheit (°F) set
Press the °C/°F button to choose the Centigrade or Fahrenheit readout. Note that the remote
temperature display on the main unit is dominated by the selection on the main unit.
Whatever the display unit of the remote unit is, it will be automatically converted to the
chosen one of the main unit.
Check weather forecast
•The Weather Forecast Station is displayed in the weather forecast reading. There are five
readings for the forecast: sunny, sunny & cloudy, cloudy, rainy and stormy.
•When the weather tendency is indicated up, it means the weather is going better. If the
weather tendency is indicated down, the weather is going bad. While the weather
tendency is indicated still, the weather remains unchanged under atmosphere pressure.
Reset the Weather Forecast Station
•Press the RESET button when the Weather Forecast Station does not operate normally.
Notes: Once resetting the Weather Forecast Station, the reliable weather data can be
obtained after about 24 hours.
P.4P.3