User Manual

40
Picture 4.59
Please note that the Reset option will erase any information stored in the NAND memory (built
-
in) and before doing so, please make sure to remove any SD Cards.
4.16
Date and Time
The system will automatically apply the date, zone, and time established by your Internet
Service Supplier.
Date, time and zone manual setup.
1. Select Setting application.
2. Slide [scroll] down the screen, select date and time.
3. Turn off “auto setting of date and time”.
4. Turn off “auto setting zone’.
5. Select Zone, then choose your time zone shown on the dropdown list. Many
other time zones are included in this feature.
6. Select Date Setting, then with the up/down selector adjust date, month, and
year, and select Settingonce again.
7. Select Time setting, then with the up/down selector adjust hour and minute,
click AM or PM to change morning or afternoon. Click Settingto finish.
8. Select 24-hour format, switch between 12-hour or 24-hour format, this
format will be used for the alarm clock.
9. Select date format setting then select the time format you want to show on
the Phablet.