Quick Start Guide

Sending SMS Commands

Command Description SMS Command Code

Disarm 120

Full arm 121

Partial arm 122

Perimeter arm 123

Receive system arming

status (master user only)

200

 To send a command by SMS:

From your cellular phone, enter text (in the order as shown in this

example):

Command Description # User Code Command code

D I S A R M # 1 2 3 4 1 2 0

NOTES:

• If you do not enter the command description (optional),

then start the SMS command with the # symbol

• The command description can be up to 43 characters long

(either capital or lower case letters)

• Do not leave any spaces between the entered text