Quick Start Guide

36
Performing Commands from Control Panel and Keyfob
Command Control Panel Procedure Keyfob Procedure
Full arm
Press . Then, if prompted, enter user code.
Press .
Partial arm
Press . Then, if prompted, enter user code.
Press .
Perimeter arm
Press . Then, if prompted, enter user code.
Press .
Disarm (and
silence alarms)
Enter user code
Press .
Activate panic
alarm
Press and simultaneously.
Press &
simultaneously.
Activate fire
alarm
Press and simultaneously.
N/A
Activate
medical alarm
Press and simultaneously; control panel
beeps to indicate alarm activation.
N/A
View system
troubles
If a trouble message displays, press to scroll
and view current system troubles.
N/A
Access menu
mode
Press and then enter user code. Scroll with
, then press to confirm selection.
N/A
Bypass /
unbypass zones
1. Press and enter master code (default is 1234).
2. Press 2.
3. Scroll with to select either:
• 2. Unbypass All (to unbypass all zones that
have been bypassed). Press twice.
-OR-
• Bypass/Unbyp (to select a specific zone to
either bypass or unbypass). Press , then
use to scroll to the zone, and now
press to toggle between bypass/unbypass
options. Finally, press to select, followed
by to save the changes.
N/A