Quick Start Guide

34
Describing the Control Panel LEDs
LED Color State Status
OK LED
N/A Off
Both AC electrical power and
battery power are disconnected
Green On
System power status is ok (no
system trouble)
Green Flashing
Open (activated) zone. Check
that the windows and doors are
closed and no movement is
detected by the detectors within
the protected area.
Yellow On System trouble
Yellow Slow flashing
Low battery (in control panel or
transmitters)
Yellow Quick flashing AC power loss
Yellow
Slow and
quick flashing
System trouble in addition to AC
power loss / low battery
(System
Status
LED)
N/A Off System is disarmed
Green On System is armed
Red Flashing
Alarm activation (flashes until
system is disarmed).
NOTE: Scroll on keypad to view
trouble message(s).
Describing the Keyfob LED
The keyfob LED flashes when transmitting a command, and also flashes to
indicate a low battery condition
.
Describing the PIR Detector LED
The PIR LED flashes upon detection.