Quick Start Guide

Assigning, Editing, and Deleting Users (User Codes)

System users (user codes) are typically designated from MyELAS

(see Step 10: Connecting to MyELAS, page 31). Alternatively, they can be

assigned from the control panel.

NOTE: At initial system installation, it is highly recommended that the

master user and engineer edit their default codes to be ones that are unique

and confidential.

NOTE: Master and engineer codes cannot be deleted.

 To assign, edit, and delete user codes:

1. At the control panel, press , and then enter the master code

(default is 1234) or the engineer code (default is 1111).

2. Use to scroll to 4. USER CODES, and then press .

3. Use to scroll to the specific code slot that you would like

to assign, edit or delete (see chart above for the available slots and

their descriptions), and then press .

4. Scroll and select either: 1. EDIT CODE (to change or delete a code)

or 2.DESCRIPTOR (to change the code description / name), and

then press .

5. Enter either the changed code or the changed code description as

follows:

• Use to move from character to character on the display

(or wait a second after entering a character to automatically move

to the next space).

• Press any button repeatedly to toggle between the letters and

number printed on it.

• Press to delete a character.

NOTE: If you want to delete a code, change (edit) it to 0000.

6. Press to confirm.