Quick Start Guide

14
Step 4: Selecting a Language
Upon initial control panel power-up, you will be prompted to select the
language and default options.
 To select a language:
1. At first installation, after control panel power-up, SELECT
LANGUAGE displays on the keypad.
2. Use to scroll to the language you would like to display at
the control panel, and then press .
3. Press to set for www.MyELAS.com (default); INITIALIZING,
and then DISARMED display.
IMPORTANT: If SYSTEM NOT READY, SYSTEM TROUBLE or TAMPER
ALARM also display, they indicate there are trouble messages (use to
scroll and view). However, these messages could be due to reasons which
may resolve automatically after a short time, thus it is recommended to
wait until after you have completed all (10) initial system setup steps before
troubleshooting.