Quick Start Guide

Step 3: Powering-Up the Control Panel

After performing all wiring tasks at the control panel, installing the SIM

card, and installing the control panel, you can now power-up the control

panel.

NOTE: After initial power-up, any subsequent removal of the control panel

from the wall will trigger a tamper alarm.

NOTE: Ignore any low battery message that may display while powering-up.

This indicates the control panel backup battery needs recharging, however the

system will operate normally using its AC power supply.

 To power-up the control panel:

Apply electrical power to the control panel with the AC power cable,

or at the circuit breaker switch; you will be prompted by the control

panel display to select a language (see Step 4).