Quick Start Guide

11
Step 2: Installing the Control Panel
Mounting Guidelines
When installing, make sure the control panel is:
• Accessible to all external connections for telephone and electrical
power supply, and additional (non-kit) Electronics Line
components.
• In a central location, in relation to the wireless components your
system will be using, with a minimal distance from the
components
• At a location where the GSM signal is adequately strong
• Near the entry/exit door of the secured site, in order to allow
enough time for leaving after arming the system
• Out-of-sight of would-be intruders, and out-of-reach of
unintended users (such as children)
• At a location with a minimal number of obstacles between the
control panel and the detectors. Metal-based construction
materials, such as thick or steel-reinforced concrete walls can
reduce the RF signal strength.