Operation Manual

-43-
6.2. Keyfob Control
You can control two separate HA units, using the four-button keyfob. This option can be
programmed by the installer. For further information on keyfob button assignments
refer to Keyfobs.
6.3. Telephone Control
Using the Telecontrol feature, you can control HA units and PGM output remotely via
the telephone. For further information on the Telecontrol features, see Telecontrol.
6.4. SMS Control
If your system supports cellular communication, you can control HA units and PGM
remotely via your mobile phone using a number of SMS commands. The SMS
commands are designed to be entered as templates on your mobile phone.
Each SMS command contains the following elements:
x SMS Command Descriptor (up to 43 characters long)
x # (separates the descriptor from the actual command)
x User Code
x Command (0=Off, 1=On)
x HA Unit Number (01-16, or 30, 31 for PGM)
The following example shows the format of an SMS command to switch on a water
boiler controlled by HA unit 08.
SMS Command Descriptor User Code On Unit
B O I L E R O N # 1 2 3 4 1 0 8
Do not include the symbol ‘#’ in the descriptor as the system regards any text after this
symbol as part of the command. The SMS Command Descriptor is optional but you must
still enter the ‘#’ before the user code.
SMS Confirmation Message Format
After an SMS command is executed by the system, if programmed by your installer, a
confirmation message may be returned to your mobile phone. This message includes the
HA unit’s descriptor and the command that was sent. The following example shows the
confirmation message you receive for the sample command from the previous section.
B O I L E R - O N