Operation Manual

-40-
Settings
The Web application provides the capability to modify the PIR camera detectors
parameter settings according to your needs
To view the video verification settings page:
From the Video Menu Bar, click Settings; the Video Verifications Settings Page is
displayed:
Figure 27: Video Verification Settings Page
To modify the PIR camera detectors parameter settings:
1. Modify the following parameter settings in the Video Verification Settings page:
Resolution Select the required image resolution (QVGA 320X240,
VGA 640X480)
Quality Select the required image quality (High, Low)
Color Select the required color setting:
Colour – checked,
B&W – unchecked
Flash Select the required flash setting:
Flash – checked
No flash – unchecked
Total Snapshots Enter the number of images that are required upon an
alarm (1 to 7)
Time between snapshots
(0.1 to 2 seconds)
Define the time interval between snapshots
2. Click Save.
Discuss this capability with your security service provider to determine if it is applicable
to your system.