User's Manual

Registering Transmitters to the Repeater
You can register up to eight transmitters to the EL-2635 repeater.
Note: Do not register the same transmitter to more than one repeater.
To register transmitters to the repeater:
1. On the LCD programming keypad, press  until 4. TX Register
appears on the display.
2. Press ; New Device appears on the display.
3. Press  again; Transmit 1 appears on the display.
4. Send two transmissions from the device you want to register.
5. When the transmitter number and Save? appear on the display,
press  to confirm registration.
Note: The EL-2635 repeater automatically allocates a transmitter
number to each newly registered device. Write this number and
the zone number on the sticker provided with the sensor and
stick it inside the transmitter’s cover for future reference.
6. After you have confirmed registration, the display returns to New
Device. Press  to register another device or
 to exit
Registration mode.
Deleting Registered Transmitters
To delete transmitters from the repeater’s register:
1. On the LCD programming keypad, press  until 3. TX Delete
appears on the display.
2. Press ; the first transmitter in the list appears on the display.
3. Use the arrow navigation keys (/) to scroll to the transmitter
you want to delete.
4. Press  to select the transmitter.
5. Press again for confirmation; the transmitter is deleted.
6. Select another transmitter to delete or press
 to exit.
Installer Utilities
The EL-2635 repeater offers two installer utilities that serve as a valuable
aid during installation and maintenance.
TX List
The TX List is a scrollable inventory of all registered transmitters and their
last reported signal strength.
To view the TX list:
1. Press  until 1. TX List appears on the display.
2. Press ; the first transmitter in the list is displayed.
3. Use the arrow navigation keys (/) to scroll through the list.
4. Press
 to exit the list.
TX Test
TX Test is a utility that enables you to identify registered transmitters and
test their signal strength.
To perform a TX test:
1. Press  until 2. TX Test appears on the display.
2. Press .
3. Activate a transmitter; the transmitter number, type and signal
strength are displayed.
4. Press
 to exit TX Test mode.
Technical Specifications
Frequency: 868.35MHz, 433.92MHz or 418MHz FM
Antenna: External Whip
Operating Voltage: 9VAC (1332 plug-in transformer) or 12VDC
Backup Battery: 6V/850mAh
(5 x 1.2V Ni-MH rechargeable cells, size AAAL, Part No. BT2635)
Current Consumption: 100mA max. (during transmission)
AC Power Protection Fuse: 0.5A/250V (Part No. EF5125)
Number of Transmitters: 8 max.
Tamper Protection: Front Cover (N.C.)
Operating Temperature: 32-140°F (0-60°C)
Dimensions: 4.3”H x 4.8”W x 0.9”D
Figure 6: TX List Procedure
Figure 7: TX Test Procedure
Figure 4: Transmitter Registration Procedure
Figure 5: Delete Transmitter Procedure