Technical data

3
3-23 Printer Setup
Service Setup (Enable LPD Printing Service)
Enable LPD Printing Service—Select to allow lpd printing.
Service Setup (Enable Port 9100)
Enable Port 9100 Print Services—This option allows application programs to open a
TCP/IP socket to the Fiery X3 at Port 9100 to download a print job.
Port 9100 Queue—You can attach Port 9100 to any of the published Fiery X3 print
connections.
Service Setup (Enable Web Services)
Enable Web Services—Select to make the Fiery WebTools available to users (see
page 4-15). TCP/IP must already be enabled on the Fiery X3 and on user
workstations. The Fiery WebTools include Fiery WebSpooler, Status, WebLink,
WebSetup, WebScan, WebDownloader, and Installer. A Java-enabled Web browser and
a valid IP address are required for each user. See Getting Started for details on
supported browsers and workstation requirements.
Printer Setup
From this window, you can access two tabs: Printer Setup and Paper Setup.
NOTE: In the following illustration, “Device name” represents the model of the copier
connected to the Fiery X3, which is 65BW-M Pro.