Technical data

3
3-14 Setting up the Fiery X3 from a Windows Computer
TO CONFIGURE APPLETALK
• Click the Protocol2 tab in the Network Setup window.
Protocol Setup (AppleTalk)
Enable AppleTalk—Select to enable Apple Talk if you have an AppleTalk network
connected to the Fiery X3. This setting enables the Fiery X3 to communicate over
AppleTalk networks.
Select Zone—The Fiery X3 searches the network for AppleTalk zones in your network
segment. Scroll through the list to select the AppleTalk zone in which you want the
Fiery X3 to appear. If your segment has only one zone, the Fiery X3 is assigned to that
zone automatically.
If no AppleTalk zone can be found, your network may have no defined zones, or else
the network cable has not been connected (see page 5-4). Choose OK.