Technical data

3
3-2 Setting up the Fiery X3 from a Windows Computer
Server Setup
From this window, you can access Server Setup, Passwords, Job Log Setup, and
Support.
Server Setup
Server Name—Specify a name for the Fiery X3. This is the name that appears in the
Chooser on an AppleTalk network.
NOTE: Do not use the device name (65BW-M Pro) as the server name. Also, if you
have more than one Fiery X3, do not give them the same name. Windows NT does
not support two computers with the same name in the same workgroup or domain.
Print Start Page—Specify whether the Fiery X3 should print a start page when it is
turned on or rebooted. The Start Page displays information about the Fiery X3,
including server name, the current date and time, amount of memory installed, last
calibration date, network protocols enabled, and print connections published.