Technical data

2
2-34 Setting up the Fiery X3
.
Web Services Setup
IPP Setup
Set Domain name
Select from list/Enter Manually [Select from list]
This option provides two ways to specify the workgroup or domain where you want
the Fiery X3 to appear.
If you selected Select from list:If you selected Enter manually:
Choose Domain
List of domains
Select the workgroup or domain from
the list.
Workgroup or Domain
Enter the name of the workgroup or
domain. For more information about
entering text and characters, see “Types of
Setup screens” on page 2-5.
Network Setup
Service Setup
Web Services Setup
Enable Web Services
Yes/No [No]
Select Yes if TCP/IP is enabled on the Fiery X3 and on user workstations, and you
wish to make the Fiery WebTools available to users (see page 4-16). The
Fiery WebTools include Fiery WebSpooler, Status, Installer, WebDownloader,
WebScan, WebSetup, and WebLink. A Java-enabled Web browser and a valid IP
address are required for each user. See Getting Started for details on browser versions
and workstation requirements.
Network Setup
Service Setup
IPP Setup
Enable IPP
Yes/No [Yes]
Select Yes to enable printing with the Internet Printing Protocol (IPP). You must
enable Web Services. For information on setting up user computers to use IPP
printing, see Getting Started.
NOTE: IPP Printing is supported on Windows 98/Me and Windows 2000 only.