Technical data

2
2-28 Setting up the Fiery X3
NOTE: If you change your mind about any of the menus you have selected, you can use
the Menu button to escape and return to the main Bindery Setup menu. To cancel all
changes, you must exit Network Setup.
Once you have chosen a file server, the Fiery X3 immediately tries to log in as a guest
without a password. If it succeeds, it skips to the NetWare Print Server option.
If you try to add a file server but all Fiery X3 connections are already being used, you
are prompted to remove a file server (see “Remove File Server” on page 2-31).
Network Setup
Service Setup
PServer Setup
Bindery Setup
Add File Server
This option gives you two ways to add a Novell NetWare file server.
Select File Server
From List/Search by Name
You may select the file server from a scrollable list, or by a name search. Choose
From List if your network does not have a large number of file servers. Select Search
by Name if the number of file servers is so large that scrolling through the list would
take a long time.
If you selected From List: If you selected Search by Name:
Add Server
List of all servers
The Fiery X3 obtains a list of NetWare
file servers by querying the IPX network.
Use the up and down buttons to select a
NetWare file server from the list. Choose
the server on which you have configured
a print server and print queue to handle
Fiery X3 print jobs.
Enter First Letters of Server Name
Use the up and down buttons to enter the
first letters of the name of the file server
you want to use, and choose OK.
Add Server
List of servers matching the search
This option is displayed if you entered
letters to search. Scroll to select the server
you want from the list.