Technical data

2
2-27 Network Setup options
Bindery Setup options
Bindery Setup menu
Network Setup
Service Setup
PServer Setup
Bindery Setup
Use Bindery Setup if you have already configured one or more bindery servers (file
servers running NetWare 3.12 or NetWare 4.x/5.x in bindery emulation) with a
Print Server and a Print Queue for Fiery X3 jobs. Before entering bindery settings,
be sure the Fiery X3 is connected to the network and the NetWare file server is
running. You need a login name, and, if access to the file server or print server is
restricted, you need a login password.
NOTE: The terms NetWare server, Novell server, and IPX file server are in common
use and are used here interchangeably to mean the server on an IPX network
running Novell NetWare networking software.
Because you can set up more than one Novell server to handle Fiery X3 print jobs,
an additional menu is displayed for this purpose. The options are:
•Add File Server—creates a new file server connection to the Fiery X3. You can set
up a maximum of eight file server connections. After you have finished adding a
new server, you return to the Bindery Setup menu, and you can set up another
server if you wish.
•View Server List—displays the list of file servers that have already been selected to
communicate with the Fiery X3.
•Edit Connection—lets you change the NetWare Print Server that will print to the
Fiery X3.
•Remove File Server—lets you disconnect the Fiery X3 from a file server to which
it is currently connected. Remove a file server when you want to reduce the
number of connections to the Fiery X3 or re-assign the connection to a different
NetWare file server.
•Exit Bindery Setup—after you added all servers, viewed a list of file servers, or
removed a file server from the list.
Exit Bindery Setup
Add File Server
View Server List
Edit Connection
Bindery Setup
Remove File Server



Bindery Setup