Technical data

2
2-23 Network Setup options
PServer Setup
Network Setup
Service Setup
PServer Setup
Enable PServer
Yes/No [No]
Select Yes if you have a Novell network connected to the Fiery X3.
Choose NDS Setup if your network uses NetWare 4.x/5.x in native mode. Choose
Bindery Setup if your network uses NetWare 3.x or uses NetWare 4.x/5.x in
bindery emulation mode.
If your network uses both NDS and Bindery, set up NDS first. Setting up NDS
after Bindery will overwrite Bindery Setup.
If your network uses both NDS and Bindery, and uses NetWare 4.x/5.x servers in
bindery emulation, note that the Fiery X3 cannot service NDS and bindery
emulation servers on the same NDS tree.
Network Setup
Service Setup
PServer Setup
NDS Setup
Before entering NDS settings, be sure the Fiery X3 is connected to the network and
you have already configured an NDS directory tree with a Printer, a Print Server,
and one or more Print Queue objects for Fiery X3 jobs (see page 4-7). To perform
NDS Setup, you may need permission to browse the NDS tree. If access to the
Print Server is restricted, you need a login password.
The main objective of NDS Setup is to specify the Print Server object. In addition,
you can indicate the location of the Fiery X3 print queues.
Note that the terms NetWare server, Novell server, and IPX server are in common
use and are used here interchangeably to mean the server on an IPX network
running Novell NetWare networking software.
Enable NDS
Yes/No [No]
Select Yes if the NetWare servers you will use to print to the Fiery X3 are running
NetWare 4.x/5.x in native mode.
Exit PServer Setup
NDS Setup
Bindery Setup
Polling Interval
PServer Setup