Technical data

2
2-19 Network Setup options
IP Address
[127.0.0.1]
Enter the Fiery X3 IP address for Token Ring. This IP address, unlike an IP address set
automatically, remains the same if you reboot the Fiery X3. You must change the
default to a valid address for your network.
Subnet Mask
[255.255.255.0]
This option lets you modify the subnet mask for printing with TCP/IP over Token
Ring. The subnet mask is set to 255.255.255.0 by default. To set the subnet mask,
enter one of the following values:
• 255.0.0.0 if the IP address starts with a number less than 128
• 255.255.0.0 if the IP address starts with a number from 128 through 191
• 255.255.255.0 if the IP address starts with a number greater than 191
NOTE: Confirm the subnet mask setting with your network administrator before
proceeding. In some cases the required setting may be different from those listed.