Technical data

2
2-12 Setting up the Fiery X3
Enable Source Routing
Yes/No [No]
Network Setup
Port Setup
Ethernet Setup
Enable Ethernet
Yes/No [Yes]
Select Yes if you have Ethernet cabling connected to the Fiery X3.
Ethernet Speed
Auto Detect/100 Mbps/10 Mbps [Auto Detect]
Select Auto Detect if your network environment is mixed, or select the speed of the
network to which the Fiery X3 is attached.
Network Setup
Port Setup
Token Ring Setup
Enable Token Ring
Yes/No [No]
Select Yes if the Fiery X3 is to be connected to a Token Ring network.
Token Ring Speed
4 Mbps/16 Mbps/Auto Detect [Auto Detect]
Select Auto Detect if your network environment is mixed, or select the speed
(4 Mbps or 16 Mbps) of the network to which the Fiery X3 is attached.
Max. Frame Size (bytes)
4202/2154/1130/632 [4202]
Select the maximum frame size recommended by the network administrator at your
site. If you are uncertain of the setting to use, select the default value (4202).