Technical data

2
2-10 Setting up the Fiery X3
The available network types, and the Setup areas that pertain to them, are summarized
in the following tables.
If the Token Ring option is installed, you have these additional options:
TO ACCESS NETWORK SETUP OPTIONS
1. Confirm that the network cable is connected to the Fiery X3.
During Network Setup, the Fiery X3 queries the network for zones, servers, and
server-based queues. If you perform Network Setup without a connected and
functioning network, default settings are used that may not meet your needs.
2. Choose Network Setup from the main Setup menu.
3. Choose Port Setup from the Network Setup menu.
For this Network or
Connection Type
Use this Port Setup Use this Protocol Setup Use this Service Setup
AppleTalk over Ethernet Ethernet Setup AppleTalk Setup AppleTalk printing (PAP) is
enabled automatically
TCP/IP over Ethernet Ethernet Setup TCP/IP Setup: Ethernet Setup LPD Setup
Web Services Setup
Windows Setup
Port 9100 Setup
IPP Setup
IPX/SPX over Ethernet Ethernet Setup IPX/SPX Setup PServer Setup (NDS,
Bindery, or both)
Parallel Parallel Port Setup — —
For this Network or
Connection Type
Use this Port Setup Use this Protocol Setup Use this Service Setup
TCP/IP over Token Ring Token Ring Setup TCP/IP Setup: Token Ring Setup LPD Setup
Web Services Setup
Windows Setup
IPX/SPX over Token Ring Token Ring Setup IPX/SPX Setup PServer Setup (NDS,
Bindery, or both)