Technical data

2
2-8 Setting up the Fiery X3
System Time
Use this option to change the system time. Enter the time based on the 24-hour clock
in the form HH:MM (Hours:Minutes). The time is used on the cover page and in Job
Logs.
Print Start Page
Yes/No [No]
Use this option to specify whether the Fiery X3 should print a start page every time it
is powered on or rebooted. The start page displays information about the Fiery X3,
including the server name, current date, and time.
Use Character Set
Macintosh/DOS/Windows [Windows]
Use this option to specify whether the Control Panel should use the Macintosh, DOS,
or Windows character set for displaying filenames. This is important if filenames
include accented or composite characters (such as é, ü, or æ).
For mixed-platform networks, choose the setting that gives the best overall
representation of the special characters you use.
Enable Printed Queue
Yes/No [Yes]
Select Yes if you want to enable the Printed queue, which creates a storage location on
the Fiery X3 disk for recent jobs that were printed from the Print queue. Users with
access to Fiery WebSpooler can reprint their own jobs from the Printed queue without
sending them to the Fiery X3 again. If you select No, jobs are deleted from the
Fiery X3 disk immediately after they are printed.
Jobs Saved in Printed Queue
1-99 [10]
This option appears only if Enable Printed Queue is set to Yes. Specify the number of
jobs to be stored in the Printed queue. Note that jobs in the Printed queue take up
space on the Fiery X3 hard disk.