Technical data

1-12 Connecting to the Network

Ethernet cable connection

The Fiery X3 supports Ethernet cabling of these types:

• Thicknet (thick coaxial Ethernet cable or 10Base5)

Connects directly to the AUI connector on the Ethernet interface of the Fiery X3.

•Unshielded Twisted Pair (UTP), deﬁned as Category 5 for use with 100BaseT or

deﬁned as Category 3 or Category 5 for use with 10BaseT

Uses an 8-pin RJ-45 connector that plugs into the RJ-45 socket on the Fiery X3.

NOTE: The 100BaseT type supported by the Fiery X3 is 100BaseTX, also known as

Fast Ethernet. If an Ethernet hub is used, it must be a 100BaseTX hub. The term

“100BaseT” is used in this manual to refer to 100BaseTX.

Back view of the Fiery X3

Power switch

Power connector

Copier interface connecto

Token Ring

RJ45 connector for Etherne

Parallel connecto