Technical data

xv About the documentation
Organization
The manual is organized as follows:
• Chapter 1 illustrates the supported network configurations and shows the network
connectors on the Fiery X3.
• Chapter 2 describes Fiery X3 configuration from the Control Panel.
• Chapter 3 describes Fiery X3 configuration from a Microsoft Windows computer.
• Chapter 4 offers guidelines for setting up Windows NT 4.0 and Novell network
servers and UNIX systems for printing to the Fiery X3.
• Chapter 5 summarizes some administrative features of Fiery X3 software that are
available for IPX/SPX, TCP/IP, and AppleTalk networks, and also offers some
troubleshooting hints.
•Appendix A describes the Token Ring option.
N
OTE
:
Administrator features described in other manuals are summarized on page 5-1.
About the documentation
This manual is part of the set of Fiery X3 documentation that includes the following
manuals for users and system administrators:
• The Configuration Guide explains basic configuration and administration of the
Fiery X3 for the supported platforms and network environments. It also includes
guidelines for setting up UNIX, Windows NT 4.0, and NetWare servers to provide
PCL and PostScript printing services to clients.
• Getting Started describes how to install software to enable users to print to the
Fiery X3. Specifically, it describes installation of printer drivers, printer description
files, and other user software provided on the User Software CD. It also explains how
to connect each user to the network.
• The Printing Guide describes how to set printing options and print to the Fiery X3.
This manual also describes how to use the software installed from the User Software
CD, including chapters on printing from Windows and Mac OS computers.