Technical data

A
A-2 Token Ring Network Option
Back view of the Fiery X3 with the Token Ring option installed
Turn off the Fiery X3 before connecting it to any network device.
NOTE: Do not attach cable to both Token Ring connectors.
TO CONNECT CABLE TO THE FIERY X3
1. Turn off the Fiery X3.
2. Connect cable from the Token Ring MAU to the Fiery X3 Token Ring card.
Configure the NetWare, Windows NT, or UNIX server to print to the Fiery X3 (see
the next two sections). Then proceed to page 2-1 for Fiery X3 Setup.
Token Ring
connectors
!