Technical data

4
4-17 Configuring the Fiery X3 and clients for Fiery WebTools
TO ACCESS THE FIERY WEBTOOLS
1. Start the Internet browser.
2. Enter the IP address or DNS name of the Fiery X3.
3. Press Return.
The Fiery X3 home page appears. Click the name of a WebTool to use it.
4. Use the Configure button to enable only certain WebTools for users.
Setting the WebLink destination
The pre-set WebLink destination can be changed; this function requires the
Administrator password if one has been set.
TO CHANGE THE WEBLINK DESTINATION
1. Start your Internet browser application.
2. Enter the IP address or the DNS name of the Fiery X3.
The Fiery X3 home page appears.
3. Enter the Administrator password (if required) and click OK.
4. Press the Control key (Mac OS) or Ctrl key (Windows) while you click the WebLink
button.
The Update WebLink dialog box appears.
5. Enter the new WebLink address (URL) and click OK.